Perhaps one of the questions that has always occupied the minds of people when buying jewelry is the number of rakes or teeth on the base of the ring. In this article, we are going to review all the positive and negative points of the two types of 4-pin and 6-pin bases to guide you in choosing the most suitable ring.

Gemstones have more visibility in 4-toothed rings

As you know, one of the most noticeable differences between rings 4 and 6 is their appearance. They have a wider field of view in the 4-toothed rings of precious stones on the ring. For example, if you have a diamond on your ring, the fewer teeth it has, and the more light it hits the rock, and as a result, the more light it reflects, it also gives it a glowing effect. In addition to being more reflective, these rings make the diamond appear larger than it really is.

On the other hand, in the 6-toothed rings, stones are seen on them smaller, due to the fact that the stones are covered too much by these claws. Therefore, diamonds or other stones on the stirrup of the ring will have less shine and transparency.

Round stones look more beautiful on 6-pin bases

Although stones and jewelry are found in more 4-toothed rings and give them an attractive and shiny appearance, but because these 4 hooks are angled, the stone also looks angular and square. This is more common in round stones, but not in rectangular stones.

On the other hand, if we place a round diamond on a ring with 6 teeth, not only does its appearance not change, but it also looks more beautiful and seductive.

It is more difficult to clean the base of the 6-ring ring

Read More: Interesting Information about Men's Ring

When it comes to cleaning and maintaining jewelry, 4-fork models certainly win this comparison. Because it is more difficult to clean rings with a 6-toothed jewel base, especially the undersides of the stone, which become more dirty.

In general, the fewer the hooks, the easier it will be to remove the jewelry base because you have access to a larger level of stone.

The ring base has 4 less security grips

Although it is said that rings that have 6 handles reduce the appearance and beauty of stones and jewelry and also they are a little more difficult to maintain and clean, but they are more safe than the other model, which has 4 branches. Therefore, increasing each of the branches is a great advantage for the safety of the ring.

In fact, each tooth wears out over time, and when it is much worn, it can easily bend or break. In this regard, if one of the teeth is damaged, more teeth are left to hold the jewelry on it, unlike rings with a 4-tooth jewel base, which if one of them is destroyed, the stone may be more at risk of loosening or loss. .

The base of the ring is 6 rings with better protection

Another advantage of 6-pronged gems is that they protect the gemstones on the rings well from sudden shocks.

Because the precious stones and jewels at the heart of such a pedestal are covered by more metal claws, they are less dangerous if the ring accidentally collides with solid objects.

Stones that are held in place by four teeth are more prone to damage because they are less protected by metal and more of the stone is in contact with the environment.

Choose a ring between 4 or 6 teeth

Now, with the explanations given, it may be difficult for you to choose the ring between the 4 or 6 rake models. But it all depends on what your priorities are. Is the appearance and beauty of the ring important to you or is it safe?

If you are one of those people who want your ring gem to shine like a diamond, we suggest that you choose the 4 bases of the ring gem.

Also, if your jewel is rectangular in shape and small in size, the 4-pin hoops on the ring are an ideal choice because these rings make the jewelry on the base look bigger, and what could be better!

Once your decision has been made and you have purchased it, do not forget to check its teeth regularly so that it is not bent or broken, and if it is damaged even slightly, refer to a specialist in this field as soon as possible and have it Repair.

But if you do not care about the appearance and beauty of the ring and do not worry about its appearance, we recommend going for rings with a 6-toothed jewel base because they are a wiser choice.

In most cases, when the stone is relatively large in size or cut into rounds, the base of the 6-ring ring is the best. Also, if you pay a lot of attention to protection and safety, choose and buy this style of rings, give yourself peace of mind and wear it safely everywhere.

If the choice between appearance and safety is difficult for you and you are confused, the best option is a 4-prong platinum ring. With this decision, you have both factors together.

Because platinum is a hard metal and wears out much more slowly than gold or silver, its teeth are much less likely to break or be damaged later.

Read More: The Best Way to Disinfect Gold and Jewelry At Home

Frequently Asked Questions about gem based ring

What is the base of the gem ring?

The prong base is mostly used for single solitary models. The task of this base, in addition to protecting and maintaining the gem, is to draw the viewer's attention to the gem of the ring rather than the metal that surrounds it.

What effect does the number of base rings of the ring have on the appearance of the ring?

The smaller the number of beads, the more light reaches the gem and as a result, its brightness increases; especially if it is a diamond. But when the number of rings is large, the glow of the jewel decreases, but instead it is completely firmly and securely fixed on the ring pedal.

Does the ring have other type of bases other than the regular ones?

Yes, there are various models of ring bases, each of which is used for specific purposes. These include cobblestone, canal, walled, hollow, bead, cluster, and level and ballerina foundations.

What is the problem with the base of the ring?

For example, it may get stuck in clothes or hair and tore them apart. This option may not be suitable for people who want to wear their rings every day.